How to reduce noise when producing coiled nails

How to reduce noise when producing coiled nails

The products made by coil nail manufacturers can be used in many industries, but we found that in the process of manufacturing coil nails, its noise is relatively large, but how to reduce noise in the process of manufacturing products?

In the process of manufacturing the product, it should be noted that the shape and quantity of the die for making the coil nails have a great relationship with the length of the punching line. This is to reduce the noise. The contact surface of the die edge and the part should not be too large. Secondly, in the process of installation It must be installed vertically on the ground in order to increase the clearance of the lower die and increase the unloading force during the unloading process, and use a soft-surface unloading plate and other methods. We can also determine the accuracy of the product and can add some exhaust slots to reduce the blast area.

Nail rolling machine manufacturers

Because the material of the product is made of metal, in order to ensure the quality of the product, it can be placed in a suitable environment, which can save energy and save a lot of costs.

The product made by the coil nail manufacturer is one of the products we often use, but in order to ensure its quality, its quality process is relatively strict. Now let's take a closer look at the introduction of this knowledge?

Because we know that the material of the product is steel, and there are some magazines in it, which will seriously affect the quality. At this time, it needs to be quenched by a quenching process. This step is to place the nails at a relatively high temperature for heating, and then immediately Place it in water with a relatively low temperature to cool down immediately. Commonly used quenching media include brine, water, mineral oil, air, etc. Quenching can improve the hardness and wear resistance of metal workpieces, so it is widely used in various tools, molds, measuring tools and parts that require surface wear resistance.

Through the combination of quenching and tempering at different temperatures, the strength, toughness reduction and fatigue strength of the metal can be greatly improved, and the combination of these properties can be obtained to meet different application requirements.