The actual processing process of the actual operation of the nail machine manufacturer is shown below:
1. Metal material coil straightening, feeding function
The sheave mechanism is selected to carry out the actual operation of feeding. When the pin wheel rotates continuously for one week, the sheave rotates 1/4 of a circle. When the sheave is feeding, the stainless steel wire carries out the actual operation of automatic straightening according to the roller bearing on the left side of the front view.
2. Product workpiece clamping
The cam mechanism is selected to carry out the clamping, and the clamping and releasing of the pressure of the stainless steel wire are completed according to the repeated movement of the pendulum rod, and the reciprocating fitness movement of the clamping rod is carried out by the continuous rotation of the camshaft.
3. Cold heading of product workpiece
The stainless steel wire is cold-headed with a crank-slider structure, the crankshaft is connected with the transmission gear, and the transmission gear is pushed when it rotates.
4. Cold extrusion of product workpieces - disconnection
A cam mechanism is selected. The basic principle of its product workpiece is very similar to the clamping equipment. The moving guide slider moves back and forth repeatedly, and then performs the cold heading effect on the stainless steel wire.