Nail machine use knowledge

Nail machine use knowledge

The coil nail manufacturer told us that before using the pneumatic nail gun, you should fully master the relevant knowledge. Only after you fully understand the content, you can use the pneumatic tool in the workplace.

When changing tools or accessories, the pneumatic nail gun should be removed from the air source first. When operating, you should wear goggles, earplugs, and masks as much as possible to maintain your own safety. Do not wear loose clothing, scarves, ties or jewelry when operating, so as not to be involved in moving or rotating parts and cause danger. When the air tool is connected to the high pressure air source, do not press the trigger when not in use. Always ensure the condition of parts, loose parts can cause serious hazards, and when replacing worn parts, use dedicated parts.

Before use, check whether the air pressure pipe is fragile or damaged. If the above situation is found, it should be updated immediately to maintain safety.

In the process of making nail roll manufacturers, the nail roll machine is an indispensable equipment, so how can we make the nail roll machine more durable?

When the nail rolling machine is working, because the striker needs to do a piston-type movement in the cylinder, lubricating oil must be added frequently to reduce the wear of the parts. Because the nail gun needs to be powered by compressed air, and the air contains a lot of water, an oil-water separator device should be connected between the air compressor and the nailing machine as much as possible to dehumidify and avoid the nailing machine. Too much moisture inside will cause the inner rubber ring to swell and fail due to soaking.

In addition, in the dusty working environment, the dust on the surface of the nail gun should be regularly removed to prevent the dust from affecting the trigger group and the nail pusher.