Knowledge of the use of nail rolling machine equipment
Coil nail manufacturers remind us that when using coil nail equipment, there are also many precautions, what are the specific aspects?
In order to maintain good working performance of the tool, lubricating oil should be added regularly. Before using the tool, a few drops of lubricating oil can be added each time, which is very critical to the use of pneumatic tools. Do not use clean oil or oil with any additives at will. Improper use of lubricating oil will damage the internal parts of the tool. Moisture and dust contained in the air are the main causes of wear and tear on pneumatic nail guns, so filters must be installed to reduce wear and tear.
The filter must be kept clean and effective in purifying the air. The filter needs to be cleaned frequently. If there is dust or blockage on the filter, the air pressure will be reduced, which will affect the performance of nailing.
The products of the roll nail manufacturer are widely used in construction, decoration, decoration, decoration, no nail head nails, no nail marks after laying, and the characteristics are suitable for the decoration industry.
It can be used in furniture making and various wood products, in the furniture manufacturing industry for sofas, sofas, sofas and leather; in the decoration industry for ceilings, sheets, etc.; The nails are very similar, with a slightly thicker head, suitable for soft and hard wood, bamboo devices, ordinary plastics, soil wall sanding, repairing furniture, packing wooden boxes, etc. During operation, the nail gun uses the strong air pressure generated by the air pump to drive the top hammer in the nail gun, and the top hammer makes a hammering motion to eject the row of nails in the row of nails, such as an object or to eject the row of nails.
The nail gun is composed of the gun body part and the clip part. The gun body part is composed of the gun body, the cylinder, the balance valve, the switch assembly, the striker assembly, the buffer pad, etc. It uses the difference between the compressed air and the atmospheric pressure to pass The trigger switch makes the firing pin reciprocate in the cylinder; the clip part is composed of the gun head, the gun cover, the fixed clip, the movable clip and other accessories. The firing pin comes out and drives the nail out.