Delivery and installation of nail machine manufacturers

Delivery and installation of nail machine manufacturers

The transportation and installation of the nail making machine should be paid attention to for newly purchased companies. In view of the difficult problems and common faults that are very easy to occur in the whole process of installation and transportation, before using a set of mechanical equipment, the structure and operation of this set of equipment should be mastered. method. Minimize problems by mastering the areas where equipment is very prone to common failures. In the same way, before using the nail making machine equipment, you must also master the whole process of its transportation and installation, and understand the common problems of the equipment during the whole process, so as to carry out stronger maintenance and application of the equipment to prevent Equipment destruction causes unnecessary harm to everyone's manufacturing.

During transportation, when using a crane to transport and unload the wooden box with the equipment, the equipment should be removed stably, covered with steel wire ropes, and the bottom box or surface should not be subject to impact and strong vibration when moving and unloading. Do not put the packing part of the wooden box upside down. When unpacking, check the external condition of the equipment, and check whether the peripherals and special tools are available according to the equipment packing list. In addition, be sure to hoist the unpacked equipment with a strong wire rope to prevent damage to the equipment and staff caused by rope breakage.

When installing the nail making machine equipment, be sure to do a good job of the concrete roadbed. The roadbed should be irrigated on a solid soil layer. Before the anchor screw is placed in the grouting hole, the vegetable oil should be wiped off the screw of the extruder, but part of the external thread must be wiped off. Apply rust inhibitor. To prevent rusting for a long time, the anchor bolts will be invalid, the mechanical equipment will be loosened, and the mechanical equipment will be damaged.